为 ArduPilot 与 PX4 项目提供工程硬件供应,可申请数据手册、参数文件与 CAD 模型|联系工程师
CubePilotGNSS 接收机2 种配置SKU CP-GNS-HERE4-G

Here4 GNSS / RTK Receiver (DroneCAN)

★★★★★4.8 (198)提供兼容性记录包含工程技术支持

Single receiver for standard navigation and return-to-launch.

配置
切换配置会同步更新参数、图片与 SKU
有现货Ships in 1-2 working daysGNSS only
按需报价。 告知平台、数量与预计交付日期,通常在 48 小时内确认报价与交期。
  • DroneCAN - consumes no UART, node ID set from the ground station
  • IP67 sealed housing rated for permanent mast mounting
  • RTK-ready: base and rover pair pre-paired before dispatch

关键参数

  • u-blox F9P
  • DroneCAN
  • IP67 housing
制造商
CubePilot
产品类型
GNSS 接收机
品类
GNSS 与 RTK
MOQ
1 unit
交期
Ships in 1-2 working days
保修
18 months
固件
ArduPilot / PX4
总线
CAN

是否适配我的飞控?

选择您的平台,查看该产品的兼容性记录。

Positioning
Receiveru-blox F9P
ConstellationsGPS, GLONASS, Galileo, BeiDou
BandsL1 / L2 dual-band
Horizontal accuracy1.5 m CEP autonomous, 1 cm + 1 ppm with RTK
Update rateUp to 8 Hz
RTK baselineUp to 30 km with a clear sky view
接口
BusDroneCAN, 2x JST-GH (in and out)
CompassIntegrated IST8310
StatusRGB LED, firmware updatable over CAN
Power
Input4.7 - 5.4 V
Typical draw~190 mA
Mechanical
HousingIP67 sealed, mast or surface mount
Weight68 g
兼容性
固件ArduPilot, PX4 (DroneCAN GNSS driver)
Not compatible withAutopilots without a DroneCAN port
Scope of supply1x receiver, mast mount, CAN cable

常见搭配产品

同品类或使用相同总线的产品。

Cube Orange+ Autopilot
Reference platform飞行控制器3 种配置
CubePilotCP-APX-ORP

Cube Orange+ Autopilot

4.9(214)
  • STM32H757 dual-core
  • Triple-redundant IMU
  • 5 UART / 2 CAN
已验证适配 1 个飞控平台
参数详情
Pixhawk 6X Autopilot
飞行控制器3 种配置
HolybroCP-APX-6X

Pixhawk 6X Autopilot

4.8(176)
  • STM32H753
  • Redundant IMU + baro
  • Ethernet baseboard
已验证适配 1 个飞控平台
参数详情
Pixhawk V6X Autopilot
飞行控制器2 种配置
CUAVCP-APX-V6X

Pixhawk V6X Autopilot

4.7(118)
  • STM32H753
  • Triple IMU, metal chassis
  • 5 UART / 2 CAN
已验证适配 1 个飞控平台
参数详情
ARKV6X Autopilot with Ethernet
飞行控制器2 种配置
ARK ElectronicsCP-APX-ARKV6X

ARKV6X Autopilot with Ethernet

4.7(64)
  • Triple-redundant IMU
  • Onboard Ethernet
  • 3x CAN
已验证适配 1 个飞控平台
参数详情